Connecting The Speakers; Connecting Front Cube Speakers To The Acoustimass Module - Bose Acoustimass 10 Series III Owner's Manual

Home entertainment speaker system
Hide thumbs Also See for Acoustimass 10 Series III:
Table of Contents

Advertisement

Setting Up

Connecting the speakers

Figure 5
Cube speaker connections
to Acoustimass module
8
CAUTION: Never connect the cube speakers directly to a receiver output. Always connect
them to the powered Acoustimass
CAUTION: Never use broken or frayed wiring, which can result in electrical shock or damage
to your system. The supplied cables are not intended for in-wall installation. Check local build-
ing codes or enlist a qualified installer.

Connecting front cube speakers to the Acoustimass module

Three individual 20-foot (6.1 m) speaker cables connect the center, right, and left front cube
speakers to the Acoustimass module (Figure 5). Be sure to match the correct cable with the
corresponding speaker location. Front speaker cables have blue RCA connectors at one end
with L (left), R (right), or C (center) molded into the connectors. The other ends of the cables
have two wires. The red collars on the + wire are labeled LEFT, RIGHT, or CENTER.
®
module, then connect the module to the receiver.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acoustimass 6 iii seriesAm 6 iiiAcoustimass 6 series iii

Table of Contents