Chauvin Arnoux PAC 10 User Manual page 9

1 Presentation
......................................................................................................
2 Description
........................................................................................................
3 Operating procedure
...................................................................................
3.1 Switching on
................................................................................
3.2 DC zero adjustment
3.3 Measurement
4 Specifications
..................................................................................................
4.1 Reference conditions
4.2 Operating conditions
4.3 Metrological specifications
4.4 Mechanical specifications
4.5 Electrical specifications
- Operating limits
- Electric shocks
4.6 Electromagnetic compatibility
5 Maintenance
......................................................................................................
5.1 Replacing the battery
5.2 Cleaning
........................................................................................
5.3 Calibration
....................................................................................
5.4 Repair
.............................................................................................
6 Appendix
.............................................................................................................
1/ PRESENTATION
The PAC 10 current clamp measures DC or AC currents, without opening
the circuit they are flowing in. The current clamp is used as an accessory
for multimeters, recorders, etc.
This clamp measures DC currents up to 600 A and AC currents up to 400
A rms (600 A peak). It outputs the form and amplitude of the current
measured as a voltage image of the primary current.
The PAC 10 has one range, 400 A (sensitivity 1 mV/A), a zero adjust
rotative button,and one light indicator for power supply.
2/ DESCRIPTION
See descriptive diagram at the end of the User Manual :
ΠLocation of the conductor during measurement
Jaws
Ž Protective non-slip guard
 Green light indicating correct power supply
 3-position on/off sliding switch
‘ Hand-held parts
’ Fitted lead 1.5 m
“ Zero DC rotative button
” Safety plugs ∅ 4 mm
SUMMARY
.................................................................
..............................................................................
...............................................................
................................................................
....................................................
.....................................................
.........................................................
.......................................................................
........................................................................
.............................................
..............................................................
9
Page
9
9
10
10
10
10
10
10
10
11
12
12
12
12
12
13
13
13
13
13
31