Subscribe to Our Youtube Channel
Related Manuals for TDK-Lambda PHV Series
Summary of Contents for TDK-Lambda PHV Series
- Page 1 IEEE DIGITAL INTERFACE SETUP MANUAL FOR PHV Series High Voltage POWER SUPPLY Document: 83550130 Rev A TDK-LAMBDA AMERICAS 405 Essex Road, Neptune, NJ 07753 Tel: (732) 922-9300 Fax: (732) 922-9334 Web: www.us.tdk-lambda.com/hp...
- Page 2 THIS PAGE LEFT INTENTIONALLY BLANK...
- Page 3 Table of Contents Overview ........................... 3 1.1. Scope............................3 1.2. ADDR LED ..........................3 1.3. Service Request (SRQ) LED ..................... 3 Interface setup information ......................5 2.1. GPIB primary address (PA) ....................... 5 2.2. Other DIP switch settings ......................5 83550130 Revision A...
- Page 4 THIS PAGE LEFT INTENTIONALLY BLANK 83550130 Revision A...
- Page 5 1. Overview 1.1. Scope This manual applies to PHV series power supplies equipped with the IEEE digital interface option. The manual describes setting the GPIB interface address only. The IEEE interface programming commands can be found in the Digital Interface Command Reference manual (document 83550100) downloadable from the PHV product page: http://www.us.tdk-lambda.com/hp/product_html/PHVpower.htm.
- Page 6 THIS PAGE LEFT INTENTIONALLY BLANK 83550130 Revision A...
- Page 7 2. Interface setup information For normal operation, only the GPIB primary address should be adjusted using switches 1 through 5 if required. The other switches, 6 through 8 remain in the OFF position. 2.1. GPIB primary address (PA) The GPIB primary address (PA) enables identification of all units connected to an IEEE-488 bus system, and each unit connected to the bus must be assigned a unique PA.
Need help?
Do you have a question about the PHV Series and is the answer not in the manual?
Questions and answers