Recovery Pump RP Lite Model 760R User Manual page 29

Step 5: Set Massage Pressure and Time
a. Press and hold the Pressure Knob while setting the pressure to the desired
pressure. Once setting the pressure, the Pressure Knob is locked.
b. Press the Time button to set massage time.
Note:
• The minimum pressure setting is 20 mmHg.
The maximum pressure setting is 100 mmHg.
• The minimum massage time setting is 15 minutes.
The maximum massage time setting is 60 minutes.
• Setting the massage time to con continues the massage until the
Start/Stop button is pressed or the Power Switch is turned off.
Guidelines for Selecting Pressure
Changing the pressure level alters the massage intensity of the by increasing
the amount of air inflating each air chamber.
Lower pressure setting applies lighter massage, and higher-pressure setting
applies more intense massage (see Table 2 as a guide for pressure
selection).
If the massage is too intense, decrease the pressure.
Table 2 - Pressure Selection for Arm, Leg, and Mini Boot Garments
Massage Intensity
Light
Medium
Intense
Step 6: Select Hold Time
At the end of each inflation cycle, the console holds the air pressure for a few
seconds before releasing the air, pausing, and then continuing to the next cycle
(the Hold Time).
You can set the duration of the Hold Time for your comfort and to alter the
massage pace (see Table 3).
Hold Time
Short Press and hold the Time button for 3 seconds.
Medium
Press and hold the Time button for 3 more seconds.
Long
Press and hold the Time button for 3 more seconds.
L98107R0-G
Pressure Setting (mmHg)
20–30
40–60
70–100
Table 3 - Setting Hold Time
Action Alarm Beeps
One beep
Two beeps
Three beeps
25