Components Of The Rp Lite® System - Recovery Pump RP Lite Model 760R User Manual

6. Components of the RP Lite
The RP Lite
(see Figure 2)
The console takes air from the room environment and sends it to individual air
chambers in the garment(s).
The RP Lite console is powered by either a DC power adapter or by a
®
rechargeable battery inside the console. The battery can be charged while the
console is operated by electricity.
Note:
• Turn On the Power Switch to enable charging the battery.
• Turn Off the Power Switch to conserve battery power when not
charging or not using the console.
The following table illustrates the battery power capacity displayed by the
battery status indicators.
Battery Status
Prong Plug
(see Figure 3)
If you use only one garment, insert this plug into the unused air outlet on the
front of the RP Lite
DC Power Adapter
(see Figure 4)
The DC Power Adapter receives 100-240 VAC, 50-60 Hz AC power and
supplies 12 VDC 3A to the console.
L98107R0-G
Console
®
Displayed Icon
Constant bars
Constant bars
Constant bars
Constant bar
Blinking bar
No bars
console, to seal it and prevent air from escaping.
®
System
®
Available Power
100%
75%
50%
25%
Almost empty
Empty
9