The Rbrc ® Seal; Fcc, Acta And Ic Regulations - VTech CS6120-2 User Manual

The RBRC ® seal
The RBRC ® seal on the nickel-metal
hydride battery indicates that VTech
Communications, Inc. is voluntarily
participating in an industry program to
collect and recycle these batteries at the
end of their useful lives, when taken out
of service within the United States and
Canada.
The RBRC ® program provides a convenient
alternative to placing used nickel-
metal hydride batteries into the trash or
municipal waste, which may be illegal in
your area.
VTech's participation in RBRC makes it
®
easy for you to drop off the spent battery
at local retailers participating in the RBRC
program or at authorized VTech product
service centers. Please call
1 (800) 8 BATTERY ® for information on
Ni-MH battery recycling and disposal
bans/restrictions in your area. VTech's
involvement in this program is part
of its commitment to protecting our
environment and conserving natural
resources.
The RBRC seal and 1-800-8-BATTERY
registered trademarks of Call2recycle, Inc.

FCC, ACTA and IC regulations

FCC Part 15
This equipment has been tested and
found to comply with the requirements
for a Class B digital device under Part 15 of
the Federal Communications Commission
(FCC) rules. These requirements are
intended to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving
®
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Changes or modifications to this
are
® equipment not expressly approved by the
party responsible for compliance could
void the user's authority to operate the
equipment.
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation. Privacy of
communications may not be ensured when
using this telephone.
To ensure safety of users, the FCC has
established criteria for the amount of
radio frequency energy that can be safely
absorbed by a user or bystander according
30
to the intended usage of the product. This
product has been tested and found to
comply with the FCC criteria. The handset
may be safely held against the ear of the
user. The telephone base shall be installed
and used such that parts of the user's body
other than the hands are maintained at a
distance of approximately 20 cm (8 inches)
or more.
This Class B digital apparatus complies with
Canadian requirement:
CAN ICES-3 (B)/NMB-3(B).
FCC Part 68 and ACTA
This equipment complies with Part 68
of the FCC rules and with technical
requirements adopted by the
Administrative Council for Terminal
Attachments (ACTA). The label on the back
or bottom of this equipment contains,
among other things, a product identifier
in the format US:AAAEQ##TXXXX. This
identifier must be provided to your
telephone service provider upon request.
The plug and jack used to connect this
equipment to premises wiring and the
telephone network must comply with
applicable Part 68 rules and technical
requirements adopted by ACTA. A
compliant telephone cord and modular
plug is provided with this product. It is
designed to be connected to a compatible
modular jack that is also compliant. An
RJ11 jack should normally be used for
connecting to a single line and an RJ14
jack for two lines. See the installation
instructions in the user's manual.
The Ringer Equivalence Number (REN) is
used to determine how many devices you
may connect to your telephone line and
still have them ring when you are called.
The REN for this product is encoded as the
6th and 7th characters following the US: in
the product identifier (e.g., if ## is 03, the
REN is 0.3). In most, but not all areas, the
sum of all RENs should be five (5.0) or less.
For more information, please contact your
telephone service provider.
This equipment may not be used with
Party Lines. If you have specially wired
alarm dialing equipment connected to
your telephone line, ensure the connection
of this equipment does not disable your
alarm equipment. If you have questions
about what will disable alarm equipment,
consult your telephone service provider or
a qualified installer.
If this equipment is malfunctioning, it must
be unplugged from the modular jack
until the problem has been corrected.
Replacement to this telephone equipment
can only be made by the manufacturer
or its authorized agents. For replacement
procedures, follow the instructions
outlined under the Limited warranty.
If this equipment is causing harm to the
telephone network, the telephone service
provider may temporarily discontinue
your telephone service. The telephone
service provider is required to notify you
before interrupting service. If advance
notice is not practical, you will be notified
as soon as possible. You will be given
the opportunity to correct the problem
and the telephone service provider is
required to inform you of your right to file
a complaint with the FCC. Your telephone
service provider may make changes in
its facilities, equipment, operation, or
procedures that could affect the proper
functioning of this product. The telephone
service provider is required to notify you if
such changes are planned.
If this product is equipped with a corded
or cordless handset, it is hearing aid
compatible.
If this product has memory dialing
locations, you may choose to store
31