Table of Contents
Advertisement
Needed from
ISP
DSL line
Depending on the variant Vigor2600 plus series you purchased, the following DSL
service must be available at your local premisses:
For Annex A
: A DSL service must be enabled on your POTS telephone line.
For Annex B
: A DSL service must be enabled on your ISDN telephone line.
DSL Parameters
The following DSL parameters are required from your ISP :
1. The VPI/VCI of the virtual channel to use on the DSL line
2. Protocol : PPPoE, PPPoA or MPoA (RFC1483/2684)
3. Encapsulation Method : LLC/SNAP or VCMUX
4. Modulation Method : T1.413, G.lite, G.DMT
(Vgior2600 plus series provides Multimode which can automatically
detect)
11
Advertisement
Table of Contents
