Advertisement
EX7-IP
The full version Installation Manual is available on the enclosed CD-ROM and can
be viewed and printed out with Acrobat Reader, which is also on the enclosed
CD-ROM. This user guide is the intellectual property of BOSCH Security Systems
and is protected by copyright
CAUTION!
–
–
!
–
–
Bosch Security Systems
Camera Grounding - For mounting the camera in potentially
damp environments, ensure to ground the system using the
ground connection of the power supply connector (see section:
Connecting external power supply).
U.S.A. models only - Section 810 of the National Electrical
Code, ANSI/NFPA No.70, provides information regarding proper
grounding of the mount and supporting structure, grounding of
the coax to a discharge unit, size of grounding conductors, loca-
tion of discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
Permanently connected equipment - Incorporate a readily
accessible disconnect device in the building installation wiring.
Power lines - Do not locate the camera near overhead power
lines, power circuits, or electrical lights, nor where it may contact
such power lines, circuits, or lights.
Quick Install
| en 3
MAN7IPB Rev.0 | 2008.10
Advertisement
