Advertisement
8 en |
2.4) Camera lens adjustments
Analog video
output
3.) Secure all cabling.
Camera Setup:
To determine if the camera is receiving a picture:
1.) Make sure the supplied software is installed in your PC/laptop
computer (For Camera Configuration and Software Viewing
Setup, refer to full version Installation Manual available on the
enclosed CD-ROM -Section 4).
2.) Connect the camera to the PC/laptop and power up the camera.
3.) Launch Configuration Manager or web-browser.
MAN7IPB Rev.0 | 2008.10
For optimum picture quality, the lens should be as close as
possible to the inside face of the viewing window, without
touching. For unique designation wall mount, rotate the camera
to desired location. Power should be applied when performing
the following adjustments.
Lens adjustment
Follow the prompts. See section 2 of full version Installation
Manual available on the enclosed CD-ROM for more detail.
Quick Install
EX7-IP
Tilt adjustment
Bosch Security Systems
Advertisement
