Access B4 Manual page 8

ENGLISH
Hydraulic elevator for disabled people
General Description _____________________________________________
Composed of a tubular structure of stainless steel AISI 316, anchored to the ground by three metallic stoppers
that hold it, and three adjustable supports, two located outside the pool (can be adjusted depending on the
structure of the swimming pool), and the third one located in the lower part of the elevator, which is supported
on the wall of the pool.
The guide's shaft is the one in charge of giving the cylinder the position of the lift seat when it is out of the
water to perform the user transfer. The fastening shaft is the one in charge to fasten the equipment and allows
the regulation depending on the depth of the pool.
The cylinder holds subject the elevator chair, whose height we can regulate, depending on the type of pool
and the bottom of itself.
There are two action commands, one located at the top of the guide shaft that allows the user the activation
of the elevator from outside of the water, and the other one located on the fastening shaft, which allows the
user to activate the lift from inside the pool.
Advantages ___________________________________________________
ü The main advantage of the ACCESS B4 elevator is its versatility to adapt to most of the swimming pools
available on the market.
ü Its installation is very simple, with only three anchors screwed on the pavement and three adjustable
supports.
ü The transfer and input of water are done within the swimming pool itself
Technical characteristics _________________________________________
Lifting capacity:
Angle of rotation:
Structure and piston:
Outer tubular structure:
Water pressure:
Chair:
120 kg
150º
Stainless steel AISI 316L
Ø 48.3 x 2 mm
3.5 - 5 bar
synthetic material suitable for outdoor facilities
ACCESS-B4
8