Dual Access (Black & White Only); Real Time Transmission - Brother MFC-820CW User Manual

Chapter 4
Note
You can choose four different resolution
settings for black & white faxes and two for
color.
Black & White
Suitable for most typed
Standard
documents.
Good for small print and
Fine
transmits a little slower than
Standard resolution.
Good for small print or artwork
S.Fine
and transmits slower than Fine
resolution.
Use when the document has
Photo
varying shades of gray or is a
photograph. This has the
slowest transmission.
Color
Suitable for most typed
Standard
documents.
Use when the document is a
Fine
photograph. The transmission
time is slower than Standard
resolution.
If you choose S.Fine or Photo and then
use the Color Start key to send a fax, the
machine will send the fax using the Fine
setting.
Dual access
(Black & White only)
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD shows the new job
number and available memory.
To send a color fax, the machine will send the
document in real time (even if
Real Time TX is Off).
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
30
Note
If the Out of Memory message appears
while scanning documents, press
Stop/Exit to cancel or Black Start to send
the scanned pages.

Real Time Transmission

When you are sending a fax, the machine will
scan the document into the memory before
sending them. Then, as soon as the phone
line is free, the machine will start dialing and
sending.
If the memory is full, the machine will send the
document in real time (even if
Real Time TX is set to Off).
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can
turn on Real Time TX.
To send a document at once without waiting
for memory transmission, set
Real Time TX to On.
a
Press
b
Press a or b to choose
Real Time TX.
Press OK.
c
Press a or b to choose On.
Press OK.
Note
4
• In real time transmission, the automatic
redial feature does not work when using
the scanner glass.
• If you are sending a color fax, the machine
will send it in real time (even if
Real Time TX is set to Off).
(Fax).
4