Standard Telephone And Fcc Notices (These Notices Are In Effect On Models Sold And Used In The United States Only.) - Brother MFC-820CW User Manual

If the product does not operate
normally when the operating
instructions are followed, adjust only
those controls that are covered by the
operating instructions. Improper
adjustment of other controls may result
in damage and will often require
extensive work by a qualified
technician to restore the product to
normal operation.
If the product has been dropped or the
cabinet has been damaged.
If the product exhibits a distinct change
in performance, indicating a need for
service.
16 To protect your product against power
surges, we recommend the use of a power
protection device (Surge Protector).
17 To reduce the risk of fire, electric shock
and injury to people, note the following:
Do not use this product near
appliances that use water, a swimming
pool or in a wet basement.
Do not use the machine during an
electrical storm (there is the remote
possibility of an electrical shock) or to
report a gas leak in the vicinity of the
leak.
18 Caution - To reduce the risk of fire, use
only No.26 AWG or larger
telecommunication line cord.
Standard telephone and FCC
Notices
(These notices are in effect on
models sold and used in the
United States only.)
This equipment is hearing-aid compatible.
When programming emergency numbers
or making test calls to emergency
numbers:
Remain on the line and briefly explain to
the dispatcher the reason for the call
before hanging up.
Perform these activities in the off-peak
hours, such as early morning or late
evening.
This equipment complies with Part 68 of the
FCC rules and the requirements adopted by
the ACTA. On the backside of this equipment
is a label that contains, among other
information, a product identifier in the format
US: AAAEQ##TXXXX. If requested, this
number must be provided to the telephone
company.
You may safely connect this equipment to the
telephone line by means of a standard
modular jack, USOC RJ11C.
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
applicable FCC Part 68 rules and
requirements adopted by the ACTA. A
compliant telephone cord and modular plug is
provided with this product. It is designed to be
connected to a compatible modular jack that
is also compliant. See installation instructions
for details.
Safety and Legal
A
95