Maintenance - Flexlite FLX-NACELLE-2G User Manual

MAINTENANCE

WARNING:
When servicing use only identical FLEXLITE replacement parts. Use of any other parts may create a hazard or
cause product damage.
WARNING:
Always wear safety goggles or safety glasses with side shields when using compressed air to clean worklights. If
operation is dusty, also wear a dust mask.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with
plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.
HEATSINK MAINTENANCE
 These FLEXLITE are made with an integrated
cooling heat sink. Designed to resist rain and dust.
Use only a low air pressure gun to clean and
remove any dust.
cleaner. The unit is clean when you can see across
the heatsink.
WARNING:
Do not immerse in water.
Don't use solvent, soap or
7