Table of Contents
Advertisement
MAINTENANCE
WARNING:
When servicing use only identical FLEXLITE replacement parts. Use of any other parts may create a hazard or cause product damage.
WARNING:
Always wear safety goggles or safety glasses with side shields when using compressed air to clean worklights. If operation is dusty, also wear a
dust mask.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and
may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result in serious personal injury.
FAN AND /OR HEATSINK MAINTENANCE
The FLX3T model is made with an integrated cooling heatsink. Designed to resist rain and dust. This heatsink must be cleaned
frequently to perform well. Use only a low air pressure gun to clean and remove any dust. Don't use solvent, soap or cleaner. The
unit is clean when you can see across the heatsink.
WARNING:
Do not immerse in water.
7
Advertisement
Table of Contents
