Operation; Maintenance - Flexlite FLX-CONTRAC-30K-110 User Manual

OPERATION

WARNING:
Do not allow familiarity with worklights to
make you careless. Remember that a careless
fraction of a second is sufficient to inflict
serious injury.
Use the plug at the end of the cord:
TO TURN THE WORKLIGHT ON: The worklightl turn on automatically when plugged.
TO TURN IT OFF : The worklight turn off automatically when unplugged.

MAINTENANCE

WARNING:
When servicing use only identical FLEXLITE replacement parts. Use of any other parts may create a hazard or
cause product damage.
WARNING:
Always wear safety goggles or safety glasses with side shields when using compressed air to clean worklights. If
operation is dusty, also wear a dust mask.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with
plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.
HEATSINK MAINTENANCE
 These FLEXLITE are made with an integrate cooling heat sink. Designed to resist rain and dust. Use only a
low air pressure gun to clean and remove any dust. Don't use solvent, soap or cleaner. The unit is clean when
you can see across the heatsink.
WARNING:
Do not immerse in water.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this
worklight. The use of attachments or accessories
not recommended can result in serious personal
injury.
6