Initial Preparations; Guidelines - Bosch EX49N Installation Instructions Manual

INITIAL PREPARATIONS

 Determine the operating voltage at the
installation site. The camera's Voltage
Regulator Board can accept a 12V DC or 24V
AC input.
See Section 2, Input Power Connections.
 Determine the optimum location for the
camera. Section 3, Mounting-Camera Base.
 All cameras have been tested prior to
shipment. After the wiring has been
reconnected, it is advisable to check the
camera's operation before installation.
 ESD protection – Cameras and circuit boards
are sensitive electronic components. It is
recommended to wear a ground strap to
ground any static charge. (Alternative: touch a
grounded metal plate for at least a minute
before proceeding with any disassembly)

GUIDELINES

The installation of the EX49 camera is explained in
Sections 1 to 5 listed below. It is important that
these steps are followed in sequence
1. Dome Removal
2. Input Power Connections
3. Mounting – Camera Base
4. Adjustments
5. Camera Re-Assembly
3