Bosch EX49N Installation Instructions Manual page 17

Note:
Gasket Back Cover - Some products have a paper
backing on the gasket. Please remove it before
installation.
Mounting - It is recommended that the camera be
mounted to a flat non-porous surface for best
results. The mounting holes and the area around
the mounting screws should be sealed with silicone
to prevent water or moisture from entering into the
unit.
Conduits and Connectors - The conduits and
connectors connecting to the housing should be
sealed with silicone to prevent water and moisture
from entering into the unit.
Housing
Mounting Hole
Mounting Bolt
Seal area around mounting hole
and bolt with silicone
Conduit/Connector
11
Seal conduit/connector
connection with silicone