Casio IT-G400 Series Software Manual page 78

QR CODE
REDUCED SPACE
SYMBOLOGY
UPC A
UPC E
STRAIGHT 2 OF 5 (IATA)
CODABLOCK F
MSI
TCIF LINKED CODE 39
(TLC39)
TRIOPTIC CODE 39
CODE 32 PHARMACEUTICAL
(PARAF)
MATRIX 2 OF 5
TELEPEN
GS1 128(EAN 128)
ISBT 128
STRAIGHT 2 OF 5 (IATA)
UCC COUPON
HAN XIN
UPC E1
CHINA POST
KOREAN 3 OF 5
AUSTRALIA POST
BRITISH POST(BPO)
CANADIAN POST
USPS 4CB
JAPAN POSTAL
NETHERLANDS KIX CODE
US PLANET
UPU FICS POSTAL
US POSTNET
 This "Scansettng" can change the setting of various barcodes, but the barcodes not
supported by IT-G400 are also included in the list. Please refer to 2.20 Barcode
scanner (p. 33) for the barcode that supports.
 Select "Symbologies", and tap on each barcode to switch to the detailedsetting screen.
On the detailed setting screen, you can set the number of digits to read barcode and
enable / disable of character calculation. Please refer to the Device Library Manual for
possible values of each setting.
 Do not change the Barcode ID for each barcode. Discrimination after barcode reading
will not operate properly.
 Depending on the specification of the barcode scanner module, it is not possible to
specify more than one POSTAL code. And, at least one POSTAL code must be enabled.
The default for IT-G400 is JAPAN POSTAL.
[Enable], [Disable], [Details]
Enable
[Enable], [Disable], [Details]
Enable
[Enable], [Disable], [Details]
Enable
[Enable], [Disable], [Details]
Enable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Enable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Enable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
[Enable], [Disable], [Details]
Disable
76