Casio IT-G400 Series Software Manual page 76

Function
Basic
Scanning
Trigger timeout (sec)
Enable auto scan
Auto scan interval(sec)
Enable continuous scan
Wedge mode
Result type
Terminator
Options
Options
Enable centering window
Center window tolerance
Decode mode
Delay before
decoding(sec)
Inverse 1D mode
Power save mode
Power save timeout(sec)
Enable aimer
Enable illumination
Defaukt value
Select waiting time from pressing trigger
key to bar code reading.
10seconds
[1s], [2s], [3s], [4s], [5s], [6s], [7s], [8s],
[9s], [10s]
Select auto scan.
Disable
[Enable], [Disable]
Select auto scan interval time.
[0.25s], [0.5s], [0.75s], [1s], [1.25s],
[1.5s], [1.75s], [2s], [2.25s], [2.5s],
[2.75s], [3s], [3.25s], [3.5s], [3.75s], [4s],
1 second
[4.25s], [4.5s], [4.75s], [5s], [5.25s],
[5.5s], [5.75s], [6s], [6.25s], [6.5s],
[6.75s], [7s], [7.25s], [7.5s], [7.75s], [8s],
[8.25s], [8.5s], [8.75s], [9s], [9.25s],
[9.5s], [9.75s], [10s]
When enabled, repeat barcode scanning
Disable
while pressing trigger key.
[Enable], [Disable]
Select how you want to pass the scanned
barcode to the application.
Clipboard
[User Message], [Keyboard Event],
[Clipboard], [Intent Broadcast]
Select barcode terminator.
None
[None], [Space], [TAB], [LF], [TAB &
LF]
Toggles priority reading of the barcode
Disable
near the center.
[Enable], [Disable]
Set the detection area size.
50
[0], [10], [20], [30], [40], [50], [60], [70],
[80], [90], [100]
Switch the scanning method of the
Quick Omni
barcode.
[Standard], [Quick Omni]
Set delay time before barcode reading.
[0sec], [0.1sec], [0.2sec], [0.3sec],
0second
[0.4sec], [0.5sec], [0.6sec], [0.7sec],
[0.8sec], [0.9sec]
Select Inverse 1D mode.
Regular Type
[Regular Type Only], [Inverse Type
Only
Only], [Inverse Auto Detect]
Select Power save mode.
Enabele
[Enable], [Disable]
Set the auto poer off time.
60seconds
1 - 65535sec
Toggle aimer.
Enable
[Enable], [Disable]
Toggle illumination
Enable
[Enable], [Disable]
74
Choseable value