Advertisement
S3 Signature Version
NTP
AWS Signature Version 2 or 4
Lyve Rack R1 and any S3 Clients must be
time synchronised via a NTP server.
Using the following option overrides the
verification when self signed certificates
are used or otherwise, the S3 request is
rejected.
"aws --no-verify-ssl"
S3 Client Requests must be signed using
AWS Signature Version 2 or 4.
The NTP server address setting for Lyve
Rack R1 is configured in CORTX Manager.
This is then configured on the underlying
Operating System on both servers once
applied via CORTX Manager.
Any S3 Clients attaching to Lyve Rack R1
must also have a NTP server address set
using the underlying Operating System.
Refer to S3 Client underlying Operatiing
System User Guide on how to set up NTP
server address.
The S3 Request has a timestamp
component in the signature to help
prevent third parties from intercepting
the request.
6
7
Page
of
Seagate PN 1104485-01_rD
Advertisement
