Advertisement
Lyve Rack R1 does not yet support
configuration of Static IPs on the CORTX
servers.
DHCP Server must also provide the IP address
of the Gateway and Domain Name Server
(DNS) to be used.
All IP addresses related to the same type of
network including its Virtual IP address, should
be configured for the same subnet.
The DHCP statically assigned Management
Interface address of each server and the
Management VIP (floating IP) must be on the
same subnet.
The DHCP statically assigned Public Data
Interface address of each server and the Data
VIP (floating IP) must be on the same subnet,
but the subnet can be different to the
management Interface group subnet.
Static IP
You must be aware of IP addresses, subnet
masks, and IP of the gateway.
DNS
Fully Qualified Domain Names (FQDN) must be
configured for:
1. Management VIP
2. Data VIP
3. Server A Management Interface IP
4. Server B Management Interface IP
Firewall
Following are the firewall configurations:
Service
Configuration
CORTX
Manager
CORTX
Manager
S3
S3
Lyve Pilot
DHCP Client
Physical
Rack
1.0M depth, 600mm wide Industry Standard
rack.
HW min U = 7
Rack U = 19 to 48U acceptable
Service
Direction
Name
Web Server
Incoming &
Outgoing
SSH
Incoming &
Outgoing
HA proxy
Incoming &
Outgoing
HA proxy
Incoming &
Outgoing
UDS
Incoming &
Outgoing
DHCPC
Outgoing
Protocol
Port
HTTPS
28100
TCP/UDP
22
HTTPS
443
HTTPS
9443
TCP/UDP
5000
UDP
68
Custom configured or specialized racks
may need a verification check to ensure
HW fit.
Be aware that, If fitted, inward facing
vertical PDUs may cause interference
3
7
Page
of
Network
Purpose
Interface
Public Management
CORTX
Network
Manager GUI
webserver port
Public Management
Execution of
Network
CORTX CLI or
generating
Support bundles
Public Data
External S3
Network
Endpoint port
Public Data
External IAM
Network
Endpoint port
Public Management
Receive Requests
Network
from Lyve Pilot
Public Management
Receives IP from
Network
DHCP server
Seagate PN 1104485-01_rD
Advertisement
