Advertisement
Must be operated with low pressure rear
exhaust installation. Back pressure not to
exceed 5Pa (~0.5mm H
Power
Each Server:
Input Power
2x 110-120vAC
Requirements:
OR
2x 220-240vAC (750W ea).
5U84 Storage enclosure:
2x 200-240V AC 50-60Hz (2200W ea)
Input Power
1047W maximum continuous
Requirements:
3572 BTUs/hour
Max Input
Power:
Heat
Dissipation:
Weights & Dimensions
Servers (2)
18.6kg / 41lb each
Height
43mm / 1.7"
Width
437mm / 17.2"
Depth
754mm / 29.7"
5U84
Storage
64kg / 141lb
Enclosure
135kg / 298lb
Empty
222.3mm / 8.75"
Loaded
444.5mm / 17.5"
Height
981mm / 38.63"
Width
Depth
Operating
Cent OS 7.8 will be pre-installed during the
System
manufacturing process.
0)
2
(w/ear 483mm / 19.01")
with the 5U84 chassis. Please check
clearances and tolerances carefully.
PDUs in rack strongly recommended.
4x C13-NEMA 5-15 1.5M and 4x C13-C14
1.5M cables are provided.
2x C19-C20 1.5M power cords are
provided.
Follow racking instructions carefully.
Refer to Lyve Rack R1 Installation Guide
on
www.seagate.com/support/lyve-
rack/installation-guide/
documentation at:
1. Go to
https://www.supermicro.com/
2. Hover over Support, and then
click Manuals.
3. In the Select Category
dropdown list, select
SuperServers.
4. In the Select Product Type
dropdown list, select 1U.
5. Click Submit Request.
6. Locate and refer to the
documents for 1U servers
SYS6019P-WTR or SYS-5019P-
WTR.
Follow racking instructions carefully –
See Lyve Rack R1 Installation Guide on
www.seagate.com/support/lyve-
rack/installation-guide/
Installation & Maintenance Guide on
www.seagate.com/support/lyve-
rack/maintenance-guide/
Only fit HDDs after the enclosure is
installed in the rack. Refer the Lyve Rack
R1 Installation Guide for details.
4
7
Page
of
and server
and Hardware
Seagate PN 1104485-01_rD
Advertisement
