Jensen CDR6221 Installation & Owner's Manual page 20

OPERATION
CDR6221
Rear Camera Operation - (Optional)
Connect an optional rear camera to the Camera Input (Black RCA connector). Refer to
the wiring diagram for details.
Manual selection - Touch CAMERA icon from the Main Menu or from any operational
mode (when enabled) to select camera mode. Touch the top left area on the screen to
exit camera mode.
Note: The manual mode is for dedicated cameras that are ALWAYS on while driving, it
is not meant for cameras that are connected to the vehicle's reverse light.
The unit will automatically select camera mode when connected to the reverse lamp
circuitry.
Front 3.5mm Aux Input
Connect an optional audio source into the 3.5mm (front panel) input. Select auxiliary
input from the Main Menu to listen to audio. Adjust volume on the external audio
source as needed (if connected to the headphone output of the device).
19