Set Your Station Id; Set Tone Or Pulse Dialing Mode; Automatic Daylight Savings Time - Brother MFC MFC-790CW Quick Setup Manual

12

Set your station ID

You should store your name and fax number to be
printed on all fax pages that you send.
a
Press MENU.
b
Press a or b to display Initial Setup.
c
Press Initial Setup.
d
Press Station ID.
e
Enter your fax number (up to 20 digits) on the
Touchscreen, and then press OK.
f
Enter your name (up to 20 characters) using
the Touchscreen, and then press OK.
To enter numbers or special letters, press
repeatedly until the character you want to enter
appears, then press the character you want to
use.
Note
• If you need to enter a character that is on the
same button as the last character, press c to
move the cursor to the right.
• If you entered a letter incorrectly and want to
change it, press d or c to move the cursor to the
incorrect character, press
g
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to a.
For details, see Entering Text in Appendix C
of the User's Guide.
Note
(USA only)
The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a
computer or electronic device to send any
message via a telephone fax machine unless
such messages clearly contain, in a margin at the
top or bottom of each transmitted page, or on the
first page of the transmission, the date and time it
is sent and an identification of the business or
other entity or other individual sending the
message and the telephone number of the
sending machines or such business, other entity
or individual.
.
13
Set tone or pulse dialing
mode
Your machine comes set for Tone dialing service. If
you have Pulse dialing service (rotary), you need to
change the dialing mode.
a
Press MENU.
b
Press a or b to display Initial Setup.
c
Press Initial Setup.
d
Press a or b to display Tone/Pulse.
e
Press Tone/Pulse.
f
Press Pulse (or Tone).
g
Press Stop/Exit.
14
Automatic Daylight
Savings Time
You can set the machine to change automatically for
daylight savings time. It will reset itself forward one
hour in the Spring and backward one hour in the Fall.
a
Press MENU.
b
Press a or b to display General Setup.
c
Press General Setup.
d
Press a or b to display Auto Daylight.
e
Press Auto Daylight.
f
Press On (or Off).
g
Press Stop/Exit.
11