Subscribe to Our Youtube Channel
Related Manuals for MicaSense RedEdge-MX DJI Matrice 100/600 Quick Mount
Summary of Contents for MicaSense RedEdge-MX DJI Matrice 100/600 Quick Mount
- Page 1 RedEdge-MX™ & Altum™ DJI Matrice 100/600 Quick Mount INTEGRATION GUIDE Rev 02 - July 2019 P/N: 805-00025 ...
-
Page 2: Table Of Contents
Table of Contents Thank you for your purchase! 2 What’s inside? 2 What’s Required? 3 Let’s get started! 3 Attaching DLS 2 mast assembly 3 RedEdge-MX Instructions 5 Attaching the RedEdge-MX and the Mount 5 Attaching the RedEdge-MX and DLS 2 to the Matrice 6 ... -
Page 3: Thank You For Your Purchase
Thank you for your purchase! These instructions show how to integrate the MicaSense RedEdge-MX and/or Altum with a DJI Matrice 100/600. It covers attaching mounting brackets included in the kit, powering the camera from the host system, and placement of the Downwelling Light Sensor (DLS 2) unit. ... -
Page 4: What's Required
What’s Required? ● #1 Phillips Screwdriver ● Cutting tool - such as scissors or diagonal cutter ● 1.5 mm hex wrench ● 2 mm hex wrench Let’s get started! Warning: Installation of this kit into a drone should be done by an experienced person, in adherence with all recommendations and guidelines of the Matrice ... - Page 5 DLS2 Mounted on Matrice 100 Assembled DLS2 Mast Mounting Plate Warning: Failure to properly secure loose wires may lead to interference with the aircraft propellers. This may damage the Matrice, RedEdge-MX/Altum, or both. ...
-
Page 6: Rededge-Mx Instructions
RedEdge-MX Instructions Attaching the RedEdge-MX and the Mount 1. Locate the four M3 x 8 mm flat-head screws and sensor mounting plate. 2. Peel off the brown protective paper from the sensor mounting plate. 3. Using the countersink screw holes, attach the mount to the back of the RedEdge-MX. 4. -
Page 7: Attaching The Rededge-Mx And Dls 2 To The Matrice
Fully connected Quick Mount Attaching the RedEdge-MX and DLS 2 to the Matrice Once assembled, the Quick Mount can quickly and easily be installed or removed from the Matrice. Power is provided by the Matrice via the Quick Mount. ... -
Page 8: Altum Instructions
Quick Mount on Matrice 100 Warning: Failure to properly secure loose wires may lead to interference with the aircraft propellers. This may damage the Matrice, RedEdge-MX/Altum, or both. Altum Instructions Attaching the Altum and the Mount ... -
Page 9: Attaching The Altum And Dls 2 To The Matrice
7. Attach the Go-Pro mount adapter of the assembled sensor mounting plate to the Quick mount adapter and secure it with the thumbscrew. 8. Connect the Quick Mount cable to the Altum wire harness. Fully connected QuickMount Attaching the Altum and DLS 2 to the Matrice ... - Page 10 5. Angle the camera so that, while flying forward, it will point nadir (straight down). The forward-tilt angle can vary by aircraft, but it is typically 8º to 12º. 6. Use zip ties to secure loose wires to prevent entanglement. ...
-
Page 11: Support
The contents of this manual are subject to change without notice. MicaSense, Inc. assumes no liability for incidental or consequential damages arising from the use of this product, and any claims by a third party. Copying of the contents of this manual, in whole or in part, as well as the scanner applications ... - Page 12 PROCESS With MicaSense sensors, you own your data. You’re not limited to a particular processing platform. You can choose whichever platform is best for you, your customer, or your project. ...
- Page 13 Located in Seattle, Washington, MicaSense delivers integrated solutions for data gathering, processing, and analytics across the global agriculture market. With decades of expertise in widely varied UAV applications, the MicaSense team is redefining remote sensing technology and pioneering new ways to collect and analyze information. ...
- Page 14 Revision History Revision Description Date 01 Initial Release 04 Dec 2018 02 Kit content updated 29 Jul 2019 Rev 02 - July 2019 PAGE 13 ...
Need help?
Do you have a question about the RedEdge-MX DJI Matrice 100/600 Quick Mount and is the answer not in the manual?
Questions and answers