Subscribe to Our Youtube Channel
Related Manuals for MicaSense RedEdge-MX DJI Inspire 2 Quick Mount Gen. 2
Summary of Contents for MicaSense RedEdge-MX DJI Inspire 2 Quick Mount Gen. 2
- Page 1 RedEdge-MX™ & Altum™ DJI Inspire 2 Quick Mount G en. 2 INTEGRATION GUIDE Rev 01 - August 2019 P/N: 805-00056 ...
-
Page 2: Table Of Contents
Table of Contents Thank you for your purchase! 2 What’s inside? 2 What’s Required? 3 Let’s get started! 3 Attaching DLS 2 mast assembly 3 RedEdge-MX Instructions 4 Attaching the RedEdge-MX and the Mount 4 Attaching the RedEdge-MX and DLS 2 to the Inspire 5 ... -
Page 3: Thank You For Your Purchase
Thank you for your purchase! These instructions show how to integrate the MicaSense RedEdge-MX and/or Altum with a DJI Inspire 2. It covers attaching mounting brackets included in the kit, powering the camera from the host system, and placement of the Downwelling Light Sensor (DLS 2) unit. ... -
Page 4: What's Required
What’s Required? ● #1 Phillips Screwdriver ● Cutting tool - such as scissors or diagonal cutter ● 1.5 mm hex wrench ● 2 mm hex wrench Let’s get started! Warning: Installation of this kit into a drone should be done by an experienced person, in adherence with all recommendations and guidelines of the Inspire ... -
Page 5: Rededge-Mx Instructions
Showing DLS2 mast mounted on Inspire 2 with DLS 2 connector facing forward Warning: Failure to properly secure loose wires may lead to interference with the aircraft propellers. This may damage the Inspire, RedEdge-MX/Altum, or both. RedEdge-MX Instructions Attaching the RedEdge-MX and the Mount ... -
Page 6: Attaching The Rededge-Mx And Dls 2 To The Inspire
3. Connect the provided Quick Mount Gen.2 RedEdge-MX cable to the RedEdge-MX “PWR/TRG” and “DLS” ports. Quick Mount Gen 2 Adapter attached to RedEdge-MX Attaching the RedEdge-MX and DLS 2 to the Inspire Once assembled, the Quick Mount Gen. 2 can quickly and easily be installed or removed from the Inspire. - Page 7 Fully connected RedEdge-MX and Quick Mount Gen 2 Warning: Failure to properly secure loose wires may lead to interference with the aircraft propellers. This may damage the Inspire, RedEdge-MX/Altum, or both. Rev 01 - August 2019 PAGE 6 ...
-
Page 8: Altum Instructions
3. Connect the provided Altum Gen. 2 Quick Mount cable to the “HOST” port found on the Altum camera and the Power/Trigger and Communication ports found on the Quick Mount. MicaSense Altum connected to Quick Mount Gen. 2 Rev 01 - August 2019 ... -
Page 9: Attaching The Altum And Dls 2 To The Inspire
Attaching the Altum and DLS 2 to the Inspire Once assembled, the Quick Mount Gen. 2 can quickly and easily be installed or removed from the Inspire. Power is provided by the Inspire via the Quick Mount Gen 2. ... -
Page 10: Support
MicaSense RedEdge-MX & Altum Quick Mount Gen. 2 for DJI Inspire 2 Instructions. The contents of this manual are subject to change without notice. MicaSense, Inc. assumes no liability for incidental or consequential damages arising from the ... - Page 11 PROCESS With MicaSense sensors, you own your data. You’re not limited to a particular processing platform. You can choose whichever platform is best for you, your customer, or your project. ...
- Page 12 Located in Seattle, Washington, MicaSense delivers integrated solutions for data gathering, processing, and analytics across the global agriculture market. With decades of expertise in widely varied UAV applications, the MicaSense team is redefining remote sensing technology and pioneering new ways to collect and analyze information. ...
- Page 13 Revision History Revision Description Date 01 Initial Release 13 Aug 2019 Rev 01 - August 2019 PAGE 12 ...
Need help?
Do you have a question about the RedEdge-MX DJI Inspire 2 Quick Mount Gen. 2 and is the answer not in the manual?
Questions and answers