Handlebars - Suzuki SV 1000S 2003 Service Manual

6 SV1000K3

HANDLEBARS

REMOVAL AND DISASSEMBLY
• Remove the handlebar balancer
NOTE:
Do not remove the handlebar balancer mounting screw before
removing the handlebar balancer. Slightly loosen the mounting
screw, and then pull the balancer assembly out of handlebars.
• Remove the rear view mirror
• Disconnect the front brake light switch coupler
• Remove the front brake master cylinder.
• Remove the right handlebar switch
• Disconnect the clutch switch lead wires
• Remove the left handlebar switch
• Remove the rear view mirror
• Remove the clutch master cylinder.
• Remove the handlebar clamp caps.
1.
2.
3.
4 and throttle grip
6.
7.
8.
5.