Notes:
The client devices shall be connected to the host for generating or restore from a saved
⚫
setting duplicate.
A setting duplicate must be saved before the device settings being manually or
⚫
automatically restored.
When a client device is configured with auto restoration on settings, any changes to its
⚫
settings will be recovered when it is powered on, disconnected, or logged off.
If the device firmware has been reset to the factory default, a firmware update will be
⚫
executed first before recovering the settings.
5.2.3 Connect Setting
When automatic connection is enabled, if the terminals associated with the machine is not
logged in for the specified time you have set, it will be automatically connected to the native
server.
RDS Solution With vMatrix User Manual
81