Black Box Zero Client S100 User Manual page 34

1) Any antenna that is built with RTL8188EUS chip and connects with USB 2.0 standard is supported
by BlackBox zero clients.
2) Please connect the WIFI antenna before the zero client is powered on.
3) Only one WIFI connection can be saved on the zero client.
4) There is no option for entering the name of a WIFI option on the zero client, therefore you cannot
hide the name (SSID) of the WIFI network which you are connecting the zero client to.
5) Although the BlackBox zero clients are with an WIFI option, for a reliable user experience, you
are recommended to connect them through Ethernet cable, as WIFI network may fluctuates and
causes unexpected lags and disconnections during operation.
6) When the Wi-Fi password is entered incorrectly, there will no prompt, the device will keep
connecting. You need to click the right button to enter the detail page, click "Ignore this network",
and then reselect Wi-Fi network and enter the correct password.
⚫ DNS Settings
You could change the DNS of zero clients on this interface manually( If you leave the
option with blank, zero clients will resolve IP address with DNS received from DHCP
server) and you could use search vmatrix server host with domain name on login
interface.
RDS Solution With vMatrix User Manual
30