Device Connection; Device Login - Black Box Zero Client S100 User Manual

3.3 Device Connection

Connect the zero client to other peripherals as shown below.
Connect the zero client to the power adapter of 5V, 2A. Do not use power adapter of
◼
other specifications to avoid damage to the zero client.
Connect the S100 zero client to a monitor with VGA port and V1 zero client to a monitor
◼
with VGA or HDMI port.
Connect the zero client to USB keyboard and mouse and other USB devices if necessary.
◼
Connect the zero client to Mic and speaker through 3.5mm jacks if necessary (Audio
◼
devices through USB ports are also supported).
Connect the zero client to the network through RJ45 type Ethernet cable to the switch or
◼
USB wireless antenna built with RT8188 chipset.

3.4 Device Login

1) After connecting to the peripherals, press the device power button.
2) After system boot, go the display page, select your correct language and desktop
resolution; factory default language is "English" and desktop resolution is "1024x768".
RDS Solution With vMatrix User Manual
20