4.1.5 Boot
To lock the device is to set up a password on device boot so that the user is required to
⚫
enter password to use the device.
When the option of "Enable remote boot" is checked, the client device can be booted
⚫
from the server manager. (The client device can be powered on remotely only after it is
powered off remotely via the management software or via the shutdown button on the
client device UI. The client device that is powered off via the physical power button
cannot be powered on remotely.)
When the option of "Auto-on with Power" is checked, the client device will be
⚫
automatically powered on with power supply.
Note:
1) To unlock the device, just clear the password and apply.
RDS Solution With vMatrix User Manual
32