Reset - Black Box Zero Client S100 User Manual

4.7 Reset

Reset Configuration - press F2 key on device boot.
⚫
This is to restore all custom configurations to factory default. This is often used for
restoring desktop resolution which is out of range of the monitor to 1027x768. If the Setting
Lock is enabled, you are required to enter password.
Reset Firmware - long press the switch button until you see the resetting window.
⚫
This is to reset the device firmware to the factory installed one. All configurations will be
recovered to the factory defaults. This is often used when device system turns faulty or is
damaged by improper firmware upgrade.
4.8 Disconnect & Logout
Disconnect: to disconnect the user session; user session is still running, files and
⚫
applications are still opened and in place when user connects again. There are two
methods for a user to disconnect his session on host:
right click on the vmatrix icon on the taskbar and click "Disconnect".
◼
RDS Solution With vMatrix User Manual
41