Table of Contents
Advertisement
Rear Access Doors
Rear access doors can be installed on the Glo-Ray
merchandising Warmer in place of the glass mirror panel. The
rear access doors will be installed at the factory if ordered at the
time of sale, but can be retro-fitted using the following
procedure. The following parts are needed to install the rear
access doors.
Part Number
Item
----------
Rear access Door assembly
05.04.146.00
Hinge Screw
04.49.027.00
Right Upper Door Bracket
04.49.028.00
Left Upper Door Bracket
04.49.029.00
Right Lower Door Bracket
04.49.030.00
Left Lower Door Bracket
To install the doors:
1. Remove the ten (10) screws that secure the mirror frame
and the glass mirror panel to the back of the unit. Carefully
remove the mirror frame and glass mirror panel.
2. Remove any gasket material left on the back of the unit.
3. Replace all the removed screws into their original holes
except for the top and middle screw on each vertical
support. These four screws will be used to mount the door
brackets.
4. Install the four door brackets using the screws left out of
each vertical support. make sure to install the proper
bracket into each location.
Left Upper
Door Bracket
Left Lower
Door Bracket
Rear Door Brackets
5. Install the upper and lower rear access doors into the
corresponding door brackets. Install both doors as follows:
a. Thread a hinge screw into one side of the hinge on the
top of the door. Tighten securely.
b. Insert the hinge screw on the door into the hole in the
door bracket on the unit.
c. align the hole on the opposite side of the hinge with the
hole in the door bracket on the opposite side of the unit.
d. Insert the remaining hinge screw through the door
bracket and into the hinge on the door. Tighten securely.
Form No. GRCmWDm-0412
®
Qty.
2
4
1
1
1
1
Right Upper
Door Bracket
Right Lower
Door Bracket
13
OPTIONS AND ACCESSORIES
Left Upper Door Bracket
Hinge Screw
Mounting
Screw
Hinge
Rear
Access
Door
Mirror Frame
Installing the Rear access Doors
Vertical
Support
Glass Mirror
Panel
Advertisement
Table of Contents
