Care And Maintenance - Uberhaus 72255118 Operator's Manual

clean, dry location.
PREPARATION
Required for assembly:
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Arrange 4 or more manpower when assembling or moving the product.
Estimated Assembly Time: 90 - 120 minutes.

CARE AND MAINTENANCE

• Our steel components for gazebo and garden accessories are treated with rust inhibiting paint that protects
it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur if these protective
coatings are scratched. This is not a defect and thus not covered by the warranty.
To minimize this condition, we recommend care when assembling & handling the product to prevent
scratching the paint. Should any scratching or damage occur, we recommend immediate touch-up with rust
inhibiting paint.
Surface rust can also be easily removed with a very light application of regular cooking oil. If surface oxidation
(rusting) occurs and if no preventive measure is taken, the oxidation may start dripping onto deck or patio and
caused damaging stains, which may be difficult to remove.
This damage can be prevented if the above-mentioned measures are taken to keep the gazebo's frame from
oxidizing.
• Do not use bleach, acid, or other abrasive cleaners on the roof or frame parts.
• Keep instruction manual for future reference.
• Keep the original packaging to store the gazebo.
Page
3