Storage And Transportation; Limited Warranty - BT -4 User Manual

Reassembly
To reassemble the marker, reverse the Disassembly instructions starting with the barrel
adapter, ball retainer and bolt removal. While reassembling the marker, you should oil
all O-rings and sliding parts. All parts and o-rings returned to the marker should be free
of debris and visual nicks and scratches which can alter the performance of the mark-
er. All screws returned to the marker must be tightened so there is no chance of them
vibrating loose.

STORAGE AND TRANSPORTATION

1. BT-4 must be clear of all paint and propellant when not being used.
TM
2. Be sure to have marker in "SAFE MODE" when not in use.
3. Make sure barrel blocking devise is in place.
4. Store BT-4™ and propellant in cool dry place.
5. Keep your BT-4™ away from children without proper supervision.
6. Your BT-4™ must be free of all paint and not attached to a propellant
source while being transported to and from the playing field.
7. Observe and obey all local, state and federal laws concerning the
transportation of paintball markers. For information concerning any of
the laws in your area, contact your local law enforcement.
11.
BT PAINTBALL DESIGNS, INC.

LIMITED WARRANTY

BT PAINTBALL DESIGNS, INC. warrants the replacement of any original part due to
defect in material and/or workmanship of this marker. This warranty will be in effect for
twelve (12) months for parts and twelve (12) months for labor following the original date
of purchase for the original purchaser. Such warranty service will be provided only if the
warranty registration card included with this manual is filled in completely and on file at
BT PAINTBALL DESIGNS, INC. All other service will be duly charged for and returned
via UPS C.O.D.
BT PAINTBALL DESIGNS, INC. will replace without charge any original part that is
determined by BT PAINTBALL DESIGNS, INC. to be defective under the terms of this
warranty. However, shipping charges are not covered hereunder. Failure due to an
accident, abuse, neglect, modification, normal wear, operator error, maintenance by
other than an authorized BT PAINTBALL DESIGNS, INC. dealer, or use of parts
inconsistent with the use originally intended for the marker as sold, is not covered by
this warranty.
There are no other warranties or guarantees, expressed or implied, made by BT PAINT-
BALL DESIGNS, INC. on this marker. The sole and exclusive liability of BT PAINTBALL
DESIGNS, INC. and/or its authorized dealers, affiliates, or agents pursuant to this war-
ranty will be for repair or replacement of the defective part; incidental or consequential
damages are expressly excluded hereunder.
BT PAINTBALL DESIGNS, INC., its authorized dealers, affiliates, or agents, will not be
liable under this warranty, nor under any state or federal law, or the common law or oth-
erwise for any damage or failure, including personal injury, resulting from such use
and/or alteration. This warranty gives you specific legal rights, and you may also have
other rights that may vary from state to state.
For warranty parts, service or information contact:
BT PAINTBALL DESIGNS, INC.
3305 EAST WASHINGTON BLVD.
FORT WAYNE, INDIANA 46803
260-424-9100
info@btpaintball.com
12.