X83; 2) Power Supply Of Motorised Models (Ec) - Delta EVODECK EC Installation And Maintenance Instructions Manual

The stands are fitted with 3 height adjustable feet (loosen and tighten with an Allen key), in order to follow
the contour of the top of the coping.
2) Wiring in the cover motor (EC)
„
Run an electrical cable with three 2.5 mm2 wires
(neutral - live - earth) up to the cable port in the
stand housing the motor.
Depending on the final position of the motor stand,
draw about 60 cm of cable through the port.
CAUTION, SAFETY:
The cable should not present a trip hazard to
people in the area of pool. We highly recommend
that the cable be run under the deck (under paving
slabs, in a trench, in a joint between slab, etc.) and
in a sheath to protect the cable and allow it to be
replaced if necessary.
A 30mA differential circuit breaker and a means of
disconnecting the power supply should be installed
at the head of the line (adifferential circuit breaker
could be used for both).
2016/01 - Indice de révision : D - Code : 35101
23/32