Advertisement

Quick Links

CONTOUR® NEXT ONE Glucose Meter– Quick Start Guide

NOTES ON SAFETY

Please read this section carefully to familiarize yourself with the features
and operations before using the unit.
1.
Do not allow other people to use your blood glucose meter. The
meter is specifically assigned to you and you only. Allowing other
people to use your meter can mislead your provider.
2.
All parts of the kit are considered biohazardous and can potentially
transmit infectious diseases, even after cleaning and disinfected all
parts.
3.
Do not place the device in liquid or put it where it could fall into the
liquid.
4.
Use of this device is only for the intended use described in this
manual.
5.
Only use
CONTOUR® NEXT
6.
Do not allow the device to contact surfaces that are too hot to
touch.
7.
Do not use the device where aerosol sprays are in use.
8.
Do not use the device if it is not working correctly or if it is damaged.
9.
Read the entire manual before using the product to test your blood
glucose.
V1.0
CONTOUR® NEXT ONE Glucose Meter
Quick Start Guide
testing strips supplied by RCP.
CAUTION: Your Contour
next ONE meter works
ONLY with Contour next
test strips and Contour
next control solution
REMOTE CARE PARTNERS
PAGE 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NEXT ONE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Contour NEXT ONE

  • Page 1 CONTOUR® NEXT ONE Glucose Meter– Quick Start Guide CONTOUR® NEXT ONE Glucose Meter Quick Start Guide NOTES ON SAFETY Please read this section carefully to familiarize yourself with the features and operations before using the unit. Do not allow other people to use your blood glucose meter. The meter is specifically assigned to you and you only.
  • Page 2 CONTOUR® NEXT ONE Glucose Meter– Quick Start Guide QUICKSTART Prepare: Wash your hands with soap and water. Dry thoroughly. Gather supplies: Lancing device, lancet, tissue (for blotting blood from your finger after the puncture). Prepare the lancing device: Unscrew the cap, push the lancet firmly into the device, remove the rounded end of the lancet by turning (save this piece), screw the cap back on, and adjust the puncture depth (usually 3).

Table of Contents