Download Print this page

Jamara Lipo 20 Instruction page 2

Advertisement

S.e. & O. Copyright JAMARA e.K. 2020
Copia e la riproduzione totale o in parte, solo con il permesso di JAMARA e. K.
All rights reserved. Copyright JAMARA e.K. 2020
Copying or reproduction in whole or part, only with the expressed permission of JAMARA e.K.
1
IT - Caricare una batteria
1. Inserire il cavo di alimentazione del caricabatterie in una presa adatta. I LED si illuminano di
verde e indicano che la batteria è pronta per la ricarica
2. Ora collega la batteria vuota al caricatore. Batterie 2S da 7,4V al connettore a 3 poli o 11,1V
batterie 3S al connettore a 4 poli. Non usare la forza e fare attenzione a non invertire la polarità.
I LED diventeranno rossi dopo pochi secondi, indicando che le celle della batteria si stanno
caricando.
Attenzione!
Quando si collega una batteria 2S, solo i primi 2 LED (Cell1-2) diventano rossi, il LED
3 (Cell 3) rimane verde. Quando si collega una batteria 3S, tutti i LED (Cell1-3) diventano
rossi.
Non appena una cella della batteria è completamente carica, il LED corrispondente diventa
verde. Poiché le celle sono caricate individualmente, è possibile che una cella sia
completamente carica prima delle altre, a seconda dello stato della batteria. Lasciare sempre la
batteria sul caricatore fino a quando tutte le celle collegate sono completamente cariche (verde)
per permettere al caricatore di bilanciare la batteria.
Riconoscimento di una batteria carica.
Quando si collega una batteria carica al caricatore, i LED diventeranno rossi per alcuni secondi e poi
torneranno verdi. Questo significa che la batteria è già completamente carica.
Riconoscimento di una batteria difettosa.
Se i LED rimangono verdi quando si collega una batteria vuota, c'è un difetto nella batteria (difetto
della cella o scarica profonda). In questo caso, scollegare immediatamente la batteria dal caricatore
e utilizzare un'altra batteria.
Istruzioni di sicurezza
• La ricarica può essere effettuata solo da adulti.
• Solo per uso interno.
• Non esporre mai il caricabatterie a polvere, sporco, umidità e luce solare diretta.
• Dopo l'uso, scollegare sempre il caricatore dalla fonte di alimentazione e rimuovere le
batterie collegate.
• Non aprire il caricatore per ripararlo. È pericoloso e perderete tutti i diritti di garanzia.
Inviare il caricabatterie al nostro servizio di assistenza per la riparazione.
• Seguire le istruzioni del produttore della batteria
Istruzioni per lo smaltimento
Apparecchi elettrici non devono essere smaltiti nei rifiuti domestici, ma devono essere smaltiti
separatamente. Siete obbligati di rimuovere le batterie e portare l´apparecchi elettrici vecchi
ai punti di raccolta comunali. Qualora ci sono dati personali sul apparecchio elettrico, devono
essere rimossi da voi stessi.
DE - Servicehändler | GB - Service centre | FR - Revendeur de service | IT - Centro assistenza | ES - Servicio asistencia | CZ - Servisní centrum
DE - Reitter Modellbau Versand, Patricia Reitter, Degerfeldstrasse 11, 72461 Albstadt, Tel. 07432 9802700, Fax 07432 2009594, info@modellbauversand.de, www.modellbauversand.de
DE - Bay-Tec, Martin Schaaf, Am Bahndamm 6, 86650 Wemding, Tel. 07151 5002192, Fax 07151 5002193, info@bay-tec.de, www.bay-tec.de
CH - Modellbau Zentral, Peter Hofer, Bersteneggstrasse 2, CH-6460 Altdorf, Tel. +41 (0) 794296225, Fax +41 (0) 418700213, info@modellbau-zentral.ch, www.modellbau-zentral.ch
EU - JAMARA e.K., Manuel Natterer, Am Lauerbühl 5, DE-88317 Aichstetten, Tel. +49 (0) 75 65/94 12-0, Fax +49 (0) 75 65/94 12-23, info@jamara.com, www.jamara.com
CZ - PenTec s.r.o., distributor Jamara for Czech Republic and Slovakia, Veleslavínská 30/19, CZ -162 00 Praha 6, Tel. +420 235 364 664, Mobil +420 739 075 380, servis@topdrony.cz, www.topdrony.cz
JAMARA e.K.
Inh. Manuel Natterer
Am Lauerbühl 5 - DE-88317 Aichstetten
Tel. +49 (0) 75 65/94 12-0 - Fax +49 (0) 75 65/94 12-23
2
GB - Charging a battery
1. Plug the power cord of the charger into a suitable socket. The LEDS light up green and indicate
that the charger is ready for charging.
2. Now connect the empty battery to the charger. 7.4V 2S batteries to the 3 pin connector or 11.1V
3S batteries to the 4 pin connector. Do not use force and pay attention to reverse polarity. The
LEDs change to red after a few seconds and indicate that the battery cells are charging.
Attention:
When connecting a 2S battery, only the first 2 LEDs (Cell1-2) change to red, LED 3 (Cell 3)
will remain green. When 3S batteries are connected, all LEDs are red (Cell1-3).
As soon as a the battery cell is full, the corresponding LED changes to green. Because the cells
are charged individually in a balanced way, it is possible that one cell is fully charged earlier than
the others. Always leave the battery on the charger until all connected cells are fully charged
(green) to allow the charger to balance your battery
Detecting a full battery.
When you connect a full battery to the charger, the LEDs will turn red for a few seconds and then
turn green again. This means that the battery is already fully charged.
Detecting a defective battery.
If the LEDs remain green when an empty battery is connected, there is a defect in the battery (cell
defect or deep discharge). In this case, immediately disconnect the battery from the charger and
use another battery.
Safety Information
• Charging may only be carried out by adults
• Only for indoor use.
• Never expose the charger to dust, dirt, moisture and direct sun light.
• After use always disconnect the charger from the power source and remove any
connected batteries.
• Do not open the charger to do repairs. This will void the guarantee and may be
dangerous. If the charger is damaged or faulty, return it to our service department
for repairs.
• Follow the instructions of the battery manufacturer.
Disposal restrictions
Electrical appliances must not be disposed of in domestic waste and must be disposed of se-
parately. You are obliged to take out the batteries, if possible, and to dispose of the electrical
equipment at the communal collection points. Should personal data be stored on the electrical
appliance you must remove them by yourself.
info@jamara.com ● www.jamara.com
Service - Tel. +49 (0) 75 65/94 12-777
kundenservice@ jamara.com

Advertisement

loading

This manual is also suitable for:

2s/3s413117