Engine installation
Front end power take-off
IMPORTANT! D1-13 engines only:
Power take-off is not allowed.
Front mounted universal bracket
This universal bracket, with adjustable attachments,
allows air conditioning compressors or hydraulic
pumps etc. to be installed and operated. The kit con-
tains the bracket and fittings.
The table below shows the width and length of the
mounting plate.
L
W
Engine
Width,
L mm (")
D1, D2-40
582 (22.9)
D2-55, D2-75
634 (25.0)
The increase in length of the engine installation
depends on how the bracket is installed. Auxiliary
equipment can increase the length further.
NOTE! Additional rear brackets are required when
installing a universal bracket on a S-drive engine .
Rear brackets are included in a separate kit.
16
Lenght,
W mm (")
140 (5.5)
170 (6.7)
Top mounted extra alternator
Added installaltion length (A): 82 mm (3.2")
Added installaltion width (B): 18 mm (0.7")
B
A