Joerns Oxford Presence User Instruction Manual page 7

English
Initial Attachment of the Integrated APC
FOLLOW THESE INSTRUCTIONS EXACTLY
The Integrated APC must be attached to the lift and connected electrically by a competent person
before use. The Integrated APC is attached to the boom using the standard Presence quick release
pin with the addition of the electrical connection which is made inside the boom.
CONNECTION
To connect the cradle:
Lift the Integrated APC up towards the boom aperture.
Insert the pin sleeve through the plastic end cap and to support the Integrated APC.
Once aligned in the boom aperture, reinsert the quick release pin fully into the sleeve until it locks
into position. YOU MUST CHECK THAT THE PIN IS SECURELY FITTED.
To do this, press your finger into the barbed end. If the pin remains stationary the lift is safe to use.
Oxford
®
Presence
7