Joerns Oxford Presence User Instruction Manual page 22

Oxford
®
Presence
REMOVAL
If your Oxford Presence is fitted with an Integrated APC, please DO NOT attempt to remove
it. The power cord will not allow effective removal and damage to the lift may occur.
CAUTION: Be sure to support the weight of the spreader bar/cradle before removing pin.
To detach pin, depress the spring barb (using a flat blade electrical screw driver or similar) and pull
the pin out.
Support the spreader bar/cradle, and then pull the pin sleeve in the opposite direction, removing it
completely from the boom. This will release the spreader bar completely.
22
WARNING
English