Additional Information - Accurate Technology ProScale 950 Series Quick Start Manual

Additional Information:

Consult the Complete User Guide at
assistance with any of these more advanced functions:
SPC PORT: Position data can be requested by external
devices, or sent from readouts equipped with a SEND key.
INPUT AND OUTPUT:
The third terminal on this strip allows for external devices (such as
pushbuttons) to act as any key on the readout. Alternatively, this terminal can
be used as an output control for limits, position monitor alarm, or Go/NoGo
features.
SPECIAL MODES: Your readout has several special modes/features that can
be enabled to add functionality. These include:
Mode/feature
Offsets
Monitor
Hold
Go, NoGo
Limits
Input device mapping
Output controls
Compensation
Programming Mode
Note: Some of the above features are not available on every readout model.
Operation Manual for ProScale LCD Readouts, version 4
www.proscale.com
Input / Output
Allows the readout to track up to 5 reference
positions at the same time.
Allows the readout to watch for unintended
motion/drift.
Allows the readout to freeze the screen
temporarily.
Allows the readout to act as a Go, NoGo gage
(up to 32 positions can be stored).
Allows readout to alert operator if position moves
outside a preset zone.
Controls how a pushbutton or footswitch works
with the readout.
Choose how the output of the readout works.
Linear, Temperature, and Non-Linear
compensation can be used to increase accuracy.
Where you customize several dozen parameters
to get the readout working exactly as you need.
or contact factory for
Function
Page 10 of 16