Advertisement
Page #
2
Pre-assembly Check List
3
WARNING of instability
4
960 Hand Crank Assembly Drawing 48L only
5
960 Hand Crank Assembly Drawing 60L and Up
6-7
960 Hand Crank Adjustable Bench Instructions
8-9
ESD Grounding
9
Cleaning
IAC Industries takes great care in the packing of its products, however damage can occur
during shipment. Check all packages and parts for any signs of damage. If damage is evident
STOP and contact the carrier that delivered your order. Request a freight claim inspector to
document the damage and begin the freight claim process.
Tools required to assemble your products are:
7/16" and 1/2" wrench or socket with ratchet. Phillips screwdriver 8" long.
Utility knife. Safety glasses and light duty protective gloves.
Power tools are NOT recommended unless they are equipped with a torque-limiting device
which can limit the torque to 10-foot lbs maximum.
Unpack your order and separate like parts. Be careful not to damage parts as they are being
moved into position. Also be sure all parts are removed from the packing materials before
these materials are thrown away.
Locate the hardware kits and keep them in a central area. If the assembly is going to take
more than one day, all individual hardware pieces should be returned to a central location.
Attention Notes (cont)
Check all parts and hardware kits against the itemized packing list found with the assembly
instructions. If you believe there are parts missing from your order please contact IAC
Industries customer service at 800-989-1422.
WARNING:
ALL PARTICLE BOARD USED IN IAC INDUSTRIES PRODUCTS ARE SOURCED ONLY FROM VENDORS THAT ARE CARB
ATCM PHASE 2 AND TSCA TITLE VI COMPLIANT WITH VALID CERTIFICATES
can expose you to wood dust, a substance known to the state of California to cause cancer. Avoid inhaling dust generated from wood products or use a
dust mask to other safeguards for personal protection. This product can expose you to chemicals, including formaldehyde, which is known to the state
of California to cause cancer, and methanol, which is known to the state of California to cause birth defects or other reproductive harm. For more
information please visit, www.P65WARNINGS.CA.GOV/WOOD.
Table Of Contents
ATTENTION NOTES:
COPY OF VENDOR CERTIFICATE AVAILABLE UPON REQUEST.
2
.
Drilling, Sawing, Sanding or Machining Wood products
Advertisement
