Electrolux EOC5644BOK User Manual page 10

10 www.electrolux.com
• Do not open the appliance door when
the function True Fan Cooking PLUS
operates, with the exception of
preheating.
• Open the appliance door with care
after the True Fan Cooking PLUS
function stops.
Refer to "Hints and tips"
chapter.
1. Open the oven door.
2. Fill the cavity embossment with tap
water.
The maximum capacity of the cavity
embossment is 250 ml.
Fill the cavity embossment with water
only when the oven is cold.
3. Put food in the appliance and close
the oven door.
4. Set the True Fan Cooking PLUS
function:
5. Press the Plus Steam button
The Plus Steam button works only
with the True Fan Cooking PLUS
function.
The indicator comes on.
6. Turn the knob for the temperature to
select a temperature.
CAUTION!
Do not refill the cavity
embossment with water
during cooking or when
the oven is hot.
7. To deactivate the appliance, press
the Plus Steam button
5.6 Display
G
.
.
, turn the
A B C
F E D
knobs for the oven functions and
temperature to the off position.
The indicator of the Plus Steam button
goes out.
8. Remove water from the cavity
embossment.
WARNING!
Make sure that the
appliance is cool before
you remove the
remaining water from the
cavity embossment.
5.5 Fast heat up function
The fast heat up function decreases the
heat up time.
Do not put food in the oven
when the Fast heat up
function operates.
1. Set the fast heat up function. Refer to
the Oven functions table.
2. Turn the knob for the temperature to
set the temperature.
An acoustic signal sounds when the
appliance is at the set temperature.
The fast heat up function
does not deactivate after the
acoustic signal. You must
deactivate the function
manually.
3. Set an oven function.
A. Timer
B. Heat-up and residual heat indicator
C. Water drawer (selected models only)
D. Core temperature sensor (selected
models only)
E. Door lock (selected models only)
F. Hours / minutes
G. Clock functions