Advertisement
Camera Installation Kit PMON-1001
Quick Installation Guide
I.
Package contents
．Camera Installation Kit PMON-1001
．Rechargeable Battery
．Quick Installation Guide
II.
Additionally required equipment
．Apple iPhone or iPod Touch with iOS5 or newer ．Ethernet cable (1.5 m / 5 ft)
III.
Concept of usage
Camera Installation Kit PMON-1001 is a light on-the-belt
hardware utility that connects to the IP camera and
provides PoE power through a short network cable while
providing wireless network access for iPhone or iPod Touch
that has a free downloaded app "CameraGo!" installed.
With the help of this installation kit it is possible to do convenient and time-saving viewing
angle and focus adjustment of ACTi cameras without needing to bring a notebook computer
up on the ladder with the long cable attached or ask someone on the ground for assistance.
IV.
Preparing the Camera Installation Kit
1. Screw in the antenna and lock it by [Lock] button.
2. Insert fully charged battery into the kit.
3. Put the kit into the belt bag.
4. Turn on the power (PWR and RDY LEDs will turn on).
．Belt Bag
．Charger
．Antenna
~
~
1
Advertisement
Table of Contents
Related Manuals for ACTi PMON-1001
Summary of Contents for ACTi PMON-1001
- Page 1 With the help of this installation kit it is possible to do convenient and time-saving viewing angle and focus adjustment of ACTi cameras without needing to bring a notebook computer up on the ladder with the long cable attached or ask someone on the ground for assistance.
- Page 2 When the camera boot up is complete, PMON-1001 will activate Wi-Fi network named “Camera_Helper” and the Wi-Fi indication LEDs of PMON-1001 will start to flash forth and back. Then use Apple device to connect to that wireless network (password: 12345678).
Need help?
Do you have a question about the PMON-1001 and is the answer not in the manual?
Questions and answers