Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ACTi PCDK Camera Demo Kit
Summary of Contents for ACTi PCDK Camera Demo Kit
- Page 1 PCDK Camera Demo Kit Product Manual Ver. 2013/07/03...
-
Page 2: Table Of Contents
Using PMAX-0110 ................ 15 Using PMAX-0101 ............... 16 Step 5: Connect the PoE Injector ..........18 Step 6: Configure the Notebook for Demo ........19 Step 7: Do the Demo ............... 20 Step 8: Repack the Demo Kit ............22 www.acti.com... -
Page 3: Precautions
On Warranty All mounting accessories and the PoE injector in the demo kit have a warranty of one (1) year. The travel suitcase is not covered under warranty. www.acti.com... -
Page 4: Safety Instructions
1) When the power-supply cord or plug is damaged. 2) If liquid has been spilled, or objects have fallen into the built-in power injector. 3) If the product has been directly exposed to rain or water. www.acti.com... -
Page 5: What Is The Camera Demo Kit
PTZ, hemispheric or dome cameras. The Camera Demo Kit makes it possible to simulate both ceiling and wall installations right on the desk. Ceiling Mount Installation Wall Mount Installation www.acti.com... -
Page 6: What's In The Box
* (1) cable pre-installed on the PoE injector the PoE injector Mount Base PoE Injector Power Cord * Comes pre-installed on the * Comes built-in in with the * Comes built-in in the demo PoE injector mount base kit base www.acti.com... - Page 7 User Manual Screw Pack x 6 For Mount Kit For Extension Tube For Use with PMAX-0110 For Use with PMAX-0101 For Use with PMAX-0101 For Use with PMAX-0101 www.acti.com...
-
Page 8: How To Prepare For A Demo
NOTE: The Camera Demo Tool uses the ActiveX control components that are different from the ACTi NVR v2.x versions, hence, make sure the notebook does not have any ACTi NVR software installed. Optional Items Camera placement is very important to project the best video output quality. That is why you need to consider the distance between the demo site and the notebook placement or the power outlet. -
Page 9: How To Use The Demo Kit
2. Release the six (6) latches surrounding the demo kit. 3. Lift to remove the cover. Space for Camera NOTE: Use the space for camera to place your camera inside the demo kit for easy transport. The camera is not included upon purchase of the demo kit. www.acti.com... -
Page 10: Step 2: Mount The Accessories
1. Insert the pre-installed Ethernet cable through the extension tube. 2. Align the tab inside the extension tube to the base slot and install the tube to the base. 3. Twist the extension tube to secure it to the base. www.acti.com... - Page 11 5. Insert the “pigtail” inside the tube, and then align the slot of the Gooseneck to the tab inside the tube and install the Gooseneck to the tube. 6. Twist the Gooseneck to align the screw holes and attach the three (3) mounting screws (included in the package). www.acti.com...
- Page 12 For a wall installation demo, retain the Gooseneck position facing upward. Applicable for all hemispheric and dome cameras. See sample below. For a ceiling installation demo, loosen the two (2) screws and turn the Gooseneck position facing down. Applicable for PTZ, hemispheric, and dome cameras. www.acti.com...
-
Page 13: Step 3: Attach The Mount
2. Align the slot of the mount kit to the tab inside the Gooseneck and install the mount kit. 3. Twist the mount kit to align the screw holes and attach the two (2) mounting screws (included in the package). www.acti.com... - Page 14 User Manual 4. Route the Ethernet cable to pass through the mount through the path or hole marked below. PMAX-0110 PMAX-0101 www.acti.com...
-
Page 15: Step 4: Install The Camera
(included in the package) to secure the camera to the mount. 3. Connect the Ethernet cable to the Ethernet port of the camera. NOTE: Try to push the Ethernet cable further into the mount to leave as few exposed cable as possible for a more presentable view. www.acti.com... -
Page 16: Using Pmax-0101
D6x, E6x, D7x, E7x, D8x, KCM-3911, KCM-7911 E8x, KCM-7111, KCM-7311 The following illustrations show the KCM-3911 camera model. 2. Connect the Ethernet cable to the Ethernet port of the camera. NOTE: Try to push the Ethernet cable further into the mount. www.acti.com... - Page 17 User Manual 3. Attach the camera cover ring to complete the installation. www.acti.com...
-
Page 18: Step 5: Connect The Poe Injector
Use the bundled universal plug converter for countries with different power sockets. Use a power extension cord (not included in the demo kit) if the power outlet is far from the demo site. The final installation would look similar to the picture below. www.acti.com... -
Page 19: Step 6: Configure The Notebook For Demo
Port Num.: 80 In this case, you may configure the notebook with the following settings: IP Address: 192.168.0.99 Subnet Mask: 255.255.255.0 To do this, follow the steps below. The following example is based on the Windows 7 operating system. www.acti.com... -
Page 20: Step 7: Do The Demo
The Camera Demo Tool uses the ActiveX control components that are different from the ACTi NVR v2.x versions, hence, make sure the notebook does not have any ACTi NVR v2.x software installed. 1. Open Camera Demo Tool. 2. When running this tool for the first time, select a PC configuration that is more similar to your notebook configuration. - Page 21 3. Demonstrate the functions of the camera. For more information, please refer to the Camera Demo Tool User Manual (download from http://www.acti.com/product/detail/Video_Management_System/ACTi_Utility_Suite). NOTE: For more tips on making an effective demo, refer to the Knowledge Base article Camera Demo Guide downloadable from the website: http://www.acti.com/support/KnowledgeBase/outside/detail.asp?KB_ID=KB20120216001...
-
Page 22: Step 8: Repack The Demo Kit
1. Once the demo is finished, remove the camera and all the accessories. 2. Place the camera and all accessories back in the demo kit. 3. Attach the cover and secure the side latches. 4. Use the bundled key to lock each latch to prevent from accidentally opening the demo kit. www.acti.com...
Need help?
Do you have a question about the PCDK Camera Demo Kit and is the answer not in the manual?
Questions and answers