Removing The Oven Door - Bosch HEI8056C Assembly Instruction Manual

Electric and induction slide-in ranges
Hide thumbs Also See for HEI8056C:
Table of Contents

Advertisement

Available languages

Available languages

en-us Electrical connection
Secure the bracket with two screws to the floor or to the
2.
base of the cabinet wall. Depending on the floor or cabi-
net material, use wood or anchorless concrete screws
(included). Concrete screws require the use of a 3/16"
masonry bit.
5.2 Removing the oven door
It is recommended to remove the oven door to reduce the
weight of the appliance and to facilitate its handling and in-
stallation.
WARNING
Failure to follow these instructions when removing the
oven door may lead to personal injury or product damage.
Make sure oven is cool and power to the oven has been
turned off before removing the door. Failure to do so
could result in electrical shock or burns.
The oven door is heavy and parts of it are fragile. Use
both hands to remove the oven door.
The door front is glass. Handle it carefully to avoid
breakage.
Grasp only the side of the oven door. Do not grasp the
handle. It may swing in your hand and cause damage or
injury. Failure to grasp the oven door firmly and properly
could result in personal injury or product damage.
To avoid injury from hinge bracket snapping closed, be
sure both levers are securely in place before removing
the door.
Do not force the door open or closed. The hinge could
be damaged and cause damage or injury.
Do not lay the removed door on sharp or pointed ob-
jects as this could break the glass. Lay it on a flat,
smooth surface, positioned so that the door cannot fall
over.
Open the oven door to its fully open position.
1.
Flip levers on hinges toward you.
2.
If necessary, use a tool, such as a screwdriver, to gently
pry the upper part of the lever away from the housing.
Take care to avoid scratching the housing.
Bring both door hinge levers to their fullest down posi-
3.
tion. The left and right door hinges differ slightly but op-
erate in the same manner.
8
4.
CAUTION - Risk of injury! Follow the instructions
below to prevent the latch from slamming shut and
pinching or cutting your hand.
Close the oven door until it catches on the hinge stop
levers, locking the hinges at the proper angle for door
removal.
a The door will be open about 7" (18 cm) at the top.
5.
CAUTION - Risk of injury! The door is heavy.
Do not grip the door by the handle.
Use both hands to firmly grip it by the sides.
Maintaining the door angle, lift the door straight up ap-
proximately 3/4" (2 cm) to unhook the hinges from the
slots and then pull it out towards you until the hinges
are clear of the oven housing.
Place the door in a convenient and stable location.
6.
Do not lay the door on its handle. This could cause
dents or scratches.
6 Electrical connection
Electrical connection
Read these instructions to safely connect your appliance
Electrical connection
to the electrical supply.
WARNING
Do not use an extension cord. If the power supply cord is
too short, have a qualified electrician install an outlet near
the appliance.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents