Safety; Power Failure; Electrically Operated Products; Manually Operated Products - SWS SeceuroGlide Excel Operating & Maintenance Manual

Safety

Safety Edge
The Safety Edge is fitted to the bottom of the door and
is activated when the door starts to close. If it comes
into contact with an object while the door is closing,
it transmits a signal to the wall mounted control unit,
the door will then stop and reopen a short distance.
The safety edge also works as a weather seal, designed
to be pressed against the ground. The bottom slat
transmitter has an IP rating of IP54 and is protected
against dust and water splashing.

Power Failure

Electrically Operated Products

If your roller garage door is not working correctly please contact your installer for assistance.
before attempting to make an adjustment or repair. Untrained operators are advised to contact an approved installer.
Power Failure
In the event of disruption to the power supply, or the
motor temporarily over heating (the motor is protected
by a thermal cut out), the door can be operated manually.
Isolate power supply before using the manual override.
To operate: Hold crank handle in line with eye and rotate
handle until the door reaches the open/closed position.
DO NOT OVERWIND
When the main power is reinstalled, ensure that the
power isolator is switched back on. If applicable secure
the handle back onto the wall. Remember to keep the
crank handle in a convenient place.

Manually Operated Products

Make sure there are no obstructions. Ensure when the curtain is running, that any other person stands clear of the curtain
and keeps hands etc. away from moving parts. You will have a lock in the locking slat.
Opening the garage door
Press slightly down on the handle when the garage
door is in the closed position; disengage the locking
mechanism(s). Ensure the key is removed before opening
the garage door. Push the garage door curtain upwards to
open. Do not let go of the garage door until it has reached
its open position.
PG 7
TO OPERATE:
Hold crank handle in line with
eye and rotate handle until
the door reaches
the open / closed
.
position
Closing the garage door
Pull the garage door down using the handle provided.
When the door reaches the close position press down
on the handle before engaging the locking mechanism.
|
SWS UK SeceuroGlide Operating & Maintenance Guide
N.B: Always isolate the power
TO OPERATE:
Externally fitted doors will need
the cover cap or override
lock removing and the crank
handle inserting. Rotate
handle until the door
reaches the open/closed
position.
TO OPERATE:
Remove lock and insert crank
handle and rotate until door
reaches the open/close
position.