Table of Contents
Advertisement
Operating Instructions
Electrically Operated Products
Whenever possible the garage door should be operated
when it is in view, making sure it is not obstructed. Ensure
when the curtain is running, that you and any other person
stands clear of the curtain and keeps hands etc. away from
the moving parts.
Control Unit
Please note the front of the control unit should only be
removed by a trained engineer. Your garage door can be
activated by pressing and releasing the buttons on the
front of the control unit, the button on your remote handset,
or a separate wall switch that you may have installed.
Hand Transmitters
The transmitters are fitted with one large button and three
smaller buttons.
The buttons on remotes can be programmed to suit your
requirements. The default setting is one button operation
that allows you to lift, stop and close the door.
PLEASE NOTE
When opening or closing the garage door you must monitor
the product until it has completed its operation. If the
product is fitted with a safety device this could be activated
during its operation which would cause the door to stop and
reopen a short distance leaving the door partly open.
PG 5
Rollixo Control Unit
Press and let go
Press and hold
|
SWS UK
SeceuroGlide Operating & Maintenance Guide
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SeceuroGlide Excel and is the answer not in the manual?
Questions and answers