Advertisement
Bring the product to a stop with the washers previously
positioned.
Secure the product with the washers and three nuts
supplied. (fig.13)
Connect the air outlet duct and the power supply.
Remove the LED ceiling light from its packaging and run the
cables through the three holes in the frame (fig.14).
Adjust the desired height of the LED ceiling light to the floor
using the cable clamp as shown in fig.15.
Move the frame closer to the plasterboard niche, then
restore the previously removed electrical connections and
make the electrical connection of the LED ceiling light,
taking care not to confuse the positive, negative and ground
polarities indicated by the labels in the electrical cables.
Lock the product to the niche with the eight screws
previously removed, fig.16.
Restore the grease filter and the metal panel fixed with
special magnets.
13
13
15
15
17
Please keep this instruction manual for future reference
13
13
14
15
14
15
16
17
16
17
Instruction manual COR540SL
5
14
14
16
16
5
13
5
Advertisement
